Year of the Horse – Horse Kit Card (No Hardware)

Celebrate the Year of the Horse with this elegant Horse Kit Card, designed to be printed flat and assembled into a striking 3D figure ✨
 

This kit card features a powerful, dynamic horse silhouette, broken down into clearly defined parts that snap together smoothly. No glue, no tools—just print, pop, and assemble. Perfect as a decorative piece, gift, or collectible, especially for Lunar New Year celebrations.

Features

• Flat kit card design – prints in one piece
• Easy, tool-free assembly – every piece breaks free easily with little visible marks
• Strong, majestic horse pose – symbolizing strength, freedom, and perseverance
• Multiple print profiles – Have an AMS? Have multiple colors? Choose the profile that best suits your needs

Printing Notes

• If printing the Multicolor NO AMS version, a pause will happen on layer 17 to swap the filament.
• Let the print bed cool completely before removing the print. Removing early may warp the piece.
• While it may be possible to print a larger version, tolerances have not been tested for larger sizes, so print at your own risk!

Assembly notes

• There are a grand total of 10 pieces. The small connector bits are throwaways.
• It is ideal to respect the orientation of pieces. The bed facing flats should always face down / behind when looking at the horse from the top / front.
• The smaller connector goes on the back, the larger connector goes on the front.
• While legs are interchangeable for back / front, the final look is only achieved by putting each leg on the correct position (see GIF).

• GIF below should explain any additional assembly necessary. If something is not clear feel free to ask.

   

Happy Printing!