Cover for DOTLUX Multiscrew Spotlights

This model is a custom-designed light shield / cover for DOTLUX Multiscrew recessed spotlights.
It is intended to reduce unwanted side light and glare, creating a cleaner and more focused lighting appearance.

The cover was designed and tested using white PETG and mounted with double-sided adhesive tape.
Because white PETG can be slightly translucent, an additional inner insert made from black PETG is included.
This insert effectively blocks stray light and prevents light bleeding through the outer cover.

Features

• Designed specifically for DOTLUX Multiscrew recessed spots
• Reduces side glare and unwanted light spill
• Two-part design: outer cover + inner light-blocking insert
• Optimized for FDM 3D printing
• No modification of the lamp required

Recommended print settings

• Material: PETG (white for outer cover, black for insert)
• Layer height: 0.2 mm
• Infill: 15–25%
• No supports required

Mounting

• Attached using double-sided adhesive tape
• Can be removed without damaging the spotlight housing

⚠️ Disclaimer / Safety Notice

This model is not an official DOTLUX product and is provided as-is.
Please be aware that recessed LED spotlights can generate heat.

• Always ensure sufficient ventilation
• Monitor temperatures after installation
• Do not use materials with low heat resistance
• Use at your own risk

I do not take responsibility or liability for any damage, overheating, or safety issues resulting from the use of this model.