Notepaper Knitting Neede Gauge

More things that look like other things! I wanted to see if I could make an accurate needle sizer and this one works pretty well! I've left all the parts editable so that you can easily swap colors, but I don't recommend playing around with the sizing unless you want a project - it took a bit to get the sizing for the needle holes just right and will likely require several tests if you want to change anything. Getting the numbers legible with a very small amount of nonsense on the top of it (holes and things) was also a bit of a challenge, so I would go off of the 3MF unless you're feeling spicy. I also find a flush of some kind helpful on this one, though I didn't add one since everyone likes a different one.

Boost MeBoosts help me make more models!

 

FILAMENTS

• Paper: Polymaker Panchroma Matte PLA, color Cotton White
• Writing Lines: Polymaker Panchroma Matte PLA, color Arctic Teal
• Numbers: Polymaker Panchroma Galaxy PLA, color Galacy Black
• Left Line: Polymaker Panchroma Matte PLA, color Lotus Pink