Regulation Logo LED Sign

This is an LED sign of the logo for the Regulation Podcast. It fits on a P1S plate, scaling might work, but the channels for the LEDs might not fit as nicely. There are only 3 solder points and channels for the wires to go into. NOTE: there are 2 holes from the circle to the logo, you only need to utilize 1 when wiring, just wanted to have different options for sides to wire. There is also a hole at the top for a nail or hook if you wanted to hang it up. 

The LEDs used were from Lamomo and work well. There is also RGB or other colors you could use. 

The power supply used was this 12v adapter.

This was used to connect to the lights.

There is an option switch that could be used, this was the one I used.