Some of you noted disliking the conical turret base— I used it for support-free printing and smooth rotation. I’ve now updated it to a teardrop-shaped base: still support-free, still spins perfectly, and the turret won’t fall out easily!
================================
📋 Recommended Print Settings (For Best Results)
Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.
Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.
Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.
Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.
🔧 Assembly Diagram Notes
Blue Lines: Require super glue for assembly. I use Gorilla Super Glue.
Yellow Lines: These are moving parts. Do not apply glue here.
Bavaria_3D Tanks
