iPhone AirPods Magsafe Stand

Required materials:

• Original Apple Magsafe Charger
• Apple watch charger (old plastic gen or new metal), old plastic gen is 7.9mm tall, new metal gen is 6.4mm
• Double stick tape (recommended)

NOTE:

You will need to print the 1.5mm spacer if you have the thinner apple watch charger, otherwise the charger will be sunken 1.5mm

 

Printing:

I did 0.12mm layer height, you may get some under extrusion here if your printer is not tuned well or are using low-quality filament, to play it safe you can do 0.2mm

 

iPhone compatibility:

For the phones with a large camera, my iPhone 16 Pro was fine, even with a Mous case on, the bump did not get in the way of the positioning of the Magsafe.

 

Double stick tape:

Use this as the model is only 45g, and the magnetic force is much stronger when taking off the phone. Tape to table.

 

Boost Me