Boost MeBoost me for free if you like this print. Thank you for your support, it is much appreciated.
Large Smooth Mousepad
This is a large mousepad designed for smooth, precise mouse movements. With its generous size and clean surface finish, it is well suited for gaming as well as productivity setups.
Key Features
- Large size: 280 × 260 × 3 mm (adjustable)
- Provides plenty of room for wide mouse movements.
- Takes about 3.5 hours to print on the H2C with the Border
- Very smooth surface
- Optimized for low friction, enabling fast, controlled, and consistent mouse movements with excellent responsiveness.
- Rounded edges
- Soft, rounded edges improve comfort and prevent sharp transitions on the wrist and forearm.
- Customizable accent border
- The border can be painted in Bambu Studio (use the Tool type “Fill” with “Edge detection”)
- Use a different color to create a subtle or bold accent
- Use the same color as the base to make the border disappear
- This will also remove the prime tower which is recommended to keep when printing with more than one color.
- Customizable Logo (optional)
- It´s possible to add an SVG File as Logo for the Mousepad. Just add and SVG to the bottom, merge it and then paint the SVG.
- Please be aware: a logo could confuse the mouse laser. This is not the case without a logo.
- Scalable for any printer
- The mousepad can be resized to fit any build plate:
- Disable “Uniform Scale” in your slicer in the scaling view
- Adjust X and Y dimensions to your desired size
- Keep the thickness unchanged for best results
Important Printing Notes
- For best results, a textured PEI build plate is highly recommended.
- It provides the best surface finish.
- Ensure the build plate is clean to guarantee proper adhesion.
- Poor adhesion may cause the edges to lift during printing.
- Do not remove the mousepad while it is still warm.
- Wait until the print has fully cooled down before removing it from the build plate. This helps maintain a clean surface finish and prevents bending.
- You should watch the Printer as it lays down the first layer. Sometimes those printers fling poop on the plate during the initial wipe. That could ruin the surface.
- I would suggest to use PLA which detaches from the plate the easiest after the print is done.
Additional Info
Slippery desk surface
Depending on you desks surface a printed Mousepad can be somewhat slippery. I thought about adding round recesses for TPU Feet but that would make resizing in the slicer more complicated. What i would suggest:
If you like this print i would appreciate a 5-Star rating and/or a Boost. Thank you!
SK3D
