March 5, 2024
Description
my first job with hueforge
the image used was created using Stable Diffusion
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Charcoal Black
At layer #5 (0.72mm) swap to Blue
At layer #7 (0.96mm) swap to Orange
At layer #10 (1.32mm) swap to White for the rest.
Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial License in my Patreon.
License:
BY-NC-SA