Also check out my other Bambu P2S printer upgrade: a fully redesigned wiper for enhanced nozzle cleaning and reduced filament splash — perfect to pair with this adapter!
This model is a PTFE tube guide designed for the Bambu Lab X2D/P2S/X1C/P1S print head to prevent the PTFE tube from rubbing and grinding against the top glass panel.
It redirects the PTFE tube to a controlled path above the print head, eliminating contact with the glass while preserving full XY and Z movement. This reduces wear on the PTFE tube, avoids glass scratching, and removes friction-related noise during fast toolhead motion.
Installation steps:
Open printer extruder
just pull the front cover, it is attached with magnets and can be taken out easily
Press the black ring around the filament tube DOWN
Pull the tube UP, while black ring is still pressed down
insert tube into the printed part (make sure the “flat/longer” side is facing away from printer
IMPORTANT!!! if you have inserted tube from the wrong side - tube will be still touching the glass. Just remove the part, and put it back with tube inserted from the other end.
insert tube back into extruder
move printed part to the extruder
put the front cover back
Features:
Prevents PTFE tube contact with top glass
Reduces tube wear and glass scratching
No impact on print volume
Lightweight and rigid geometry
Designed specifically for Bambu Lab X1/X2/P1/P2 toolheads
Print notes:
Only 2.5g !
No supports required
PETG or ABS recommended (PLA also works if you never print with high-temperature filaments)
Delphir
