INSEKT box knife

INSEKT knife 

NO NEED FOR AN AMS - PRINTS WITHOUT SUPPORTS.

box cutter / utility knife using those disposable blades you can find at any hardware store.

Safety guard / sleeve included.

Uses 2 - M3X10mm and 1 - M3X8mm bolts with 3 - M3 nuts.

There’s 4 plates - 3 to print in separate colours and a 4th plate to print the whole knife in one shot as a single colour.

I suggest using a 20% infill, 5 base and top layers with 3 walls for strength. Mine are printed in PLA and is easily strong enough for most applications.

As with anything using sharp blades, safety is paramount. Please take utmost care when using any printed knife.

You print and use the design at your own risk. I accept zero responsibility for any harm or damage caused through printing this file.