Boost MePlease Boost ME if you like it.
🧩 Design Overview
- 3-part design
- Bottle hook
- Buckle connector
- Belt / pants mount
- Easy to assemble and easy to use
- Lightweight but strong when printed with proper settings
💡 Use Cases
- Walking, commuting, or travelling
- DIY work, gardening, or workshops
- Events where you don’t want to carry a bag
- Everyday hands-free hydration
🥤 Bottle Compatibility
✔ Works well with:
- 300ml bottles
- 600ml bottles
- Up to 1L bottles (maximum recommended size)
- Water, Coke, Pepsi, tea bottles, etc.
⚠️ Important notes:
- Larger bottles = more weight → may affect comfort and user experience
- Not suitable for large-neck bottles (e.g. Gatorade-style bottles)
- Bottle neck size is the limiting factor, not bottle height
🖨️ Printing Recommendations
- Material: PLA+, PETG, or ABS
- PETG recommended for better strength and flexibility
- Infill: 20–40% (increase for heavier bottles)
- Layer Height: 0.2–0.28 mm
- Perimeters/Walls: 3–4 walls recommended
- Supports: Not required (depending on orientation)
For best results, print the belt mount with higher infill for strength.
📦 Assembly
- No tools required
- Parts snap together via the buckle design
- Easy to detach bottle when not in use
⚠️ Disclaimer
- This is a 3D printable model, not a physical product
- Strength depends on print material, settings, and printer calibration
- Test with lighter bottles first before using with heavier ones
Version Updates:
18/05/2026 - Added a profile with a brim to reduce the chance of failure for users with non-CoreXY printers. A1 / A1 mini
Sunnyallday
