Ukraine Flag 240mm LED Lightbox Lens

How about a big beautiful Ukraine flag 240mm round LED lightbox? It really is pretty stunning. Stop the print after Layer 5 for a medallion.

This version of lightbox lens fits my 240mm lightbox back and stand file. You need the lens and the back for a complete lightbox. Standard back and base available here: https://makerworld.com/en/models/2168648-lightbox-back-and-stand-for-mzip-240mm-lightboxes A fancy base with customizable faceplate and rear power jack is available here: https://makerworld.com/en/models/2147170-240mm-base-w-power-jack-and-separate-front-plate

I used Bambu Basic jade white, yellow, cyan or blue, and black PLA for my prints. Cyan is shown in the photos.

Note On Commercial Use: You may print and sell this model with no license fee. Nobody is allowed to redistribute the actual files used to create the models.

Parts I used for the complete lightbox:

2 each M4x18 machine screws (if using the base)

RF LED Strip Light Dimmer, Amazon.com ASIN B0C58VYTFD

LED strip: USB LED Strip Light Cool White 6000K 5V USB Powered 13.12ft/4M 240LEDs Flexible SMD2835 High Brightness No-Waterproof IP20 LED Tape Lights(2pcs x 6.6ft) ASIN B08M65DKZ7

You can also use Bambu striplight sets if you prefer.

5-24V DC power supply (if you use the LED Strip Light Dimmer above)

Clear or black silicone seal to attach the lens to the lightbox back