Intellectual Property Disclaimer
This model is a fan-art creation. All rights to the LEG.0 and Crocs brands, including logos, names, and distinctive designs, belong to their respective owners: The LEG.0 Group and Crocs, Inc. This 3D model is intended for personal use only and is not an official product of either company.
Find out the keychain version here:
Brick Clog: Finally, You Can Walk on Bricks!
We’ve all spent a lifetime trying not to step on bricks. Now, with the Brick Clog, you can finally wear them! This 3D-printable footwear merges the iconic clog silhouette with the unmistakable geometry of the world’s most famous building blocks.
⚙️ Print Settings & Technical Specs
This model was developed and tested on a Bambu Lab P1S. To get the best results, please consider the following:
- Recommended Material: For a functional and wearable experience, TPU (Shore 95A or softer) is the way to go. The flexibility of TPU allows for a proper fit and provides necessary impact absorption.
- Prototype Note: The version pictured was printed in PETG. While it captures the "plastic brick" look perfectly, it is rigid. It’s ideal for display or as a conversation piece, but TPU is superior for actual use.
- Sizing & Build Volume:
- On a P1S (256x256mm), the model was scaled down to fit the print bed.
- Scale Warning: If you are looking to print a full Size 43 (EU), you will need a larger build plate found on printers like large-format machines (e.g., H1S / H1C).
Slicer Tips
- Layer Height: 0.2mm or 0.24mm for a clean finish.
- Supports: Essential if printed tilted. Tree Supports work best for easy removal.
- Infill: 10-12% (Gyroid) offers a great strength-to-weight ratio.
Disclaimer: This is a fan-inspired creative project. If you choose to print in rigid materials like PETG, please be careful as the soles can be slippery on smooth floors!
stecasa96
