Working Minecraft Jukebox

                                how it works ---->https://youtu.be/-zSAygGtLZE <---- how it works

I’m a huge Minecraft fan and I wanted something cool for my desk, so I built this functional Jukebox. It’s not just a plastic cube – it actually works!

When you slide in a music disc, it starts playing your favorite tunes. Pull the disc out, and the music stops instantly. It’s super satisfying to use and looks awesome.

How it works:

The heart of the build is an Arduino connected to an RFID reader (MFRC522) and an MP3 module (DFPlayer Mini). I’ve hidden RFID tags inside the 3D-printed discs. The Arduino constanty checks if a disc is in the slot. If it is, it tells the MP3 player to go loud!

What I used:

Brain: Arduino UNO R3 (Nano or Uno works fine).

Music: DFPlayer Mini + Micro SD card (fill it with your favorite Minecraft OST!).

Magic: MFRC522 RFID reader + tags for the discs.

Sound: A small 8 Ohm speaker.

NFC tags (ntag 216)

Power: 9V battery with 90 degrees DC jack connector or power bank

8x 5x5x5 mm Magnets for the panels 

Some dupont wires

The Build:

I designed the box to be as game-accurate as possible (10x10cm), especially that iconic grill texture on the sides. The print is pretty straightforward, I used PLA black and brown (and color for the discs)

I did everything myself from the ground up (except for the internal Arduino mount). If you have any questions about the code or wiring, just ask me in the comments!

Connection diagram: RFID RC522 pins SDA to D10, SCK to D13, MOSI to D11, MISO to D12, RST to D9 and power it with 3.3V, then connect the DFPlayer Mini by wiring TX to A1 and RX to A0 with a 1kΩ resistor. I also added 2 buttons for changing volume (D2 and D3 to GND), but you don't need to do that if you don't want to.

Enjoy the tunes!