Electric drum kit drumsticks holder

A holder for drumsticks that clips to the leg of an electric drum kit.

Clips on to most electric drum kits, but was designed with Roland in mind. The diameter of the clip for the leg is 37mm which seems to fit a 38.5mm Roland leg quite snugly. The holder will happily hold 7a to 5b drumsticks, and will just about hold 2b, but it's a bit of a stretch.

Printing instructions

Make sure you use 3 walls or more to make the clips solid. Arachne walls helps with this too. Infill can be anything, and doesn't need to be particularly high as it never comes under a lot of force. Brims are a good safe bet, but I personally haven't needed them. I printed these in PLA, but I think PETG would be the best bet, as it flexes a bit better and shouldn't get looser over time.

If you would like a design with either a different size leg clip, or stick clips, let me know and I'll have a bash!

This is one of several types of drumstick holders I have made, you can find my others here: https://makerworld.com/@Jammy/collections/1002162

Cheers!