Masking Tape Holder and Dispenser

A 3D printed wall-mounted tape dispenser designed for 26mm masking tape rolls, featuring an integrated printed blade and tension-based holder.
 

Assembly Notes
-Blade Installation

• The plastic blade component requires super gluing to the main body
  Print the blade on a non-textured PEI plate for better masking tape adhesion and cleaner edge finish

Mounting

• Recommended: Double-sided sticky tape only
• Not recommended: Magnets - would require immense force and grippy coating to be effective

Design Credits
This design was heavily inspired by the CW-T-M-R Tape Dispenser. Please credit and reference the original design when sharing or remixing this model.