Commodore Themed Raspberry Pi Case

Designed to fit a Raspberry Pi 3,4 and 5.

High Quality 3D Printed Raspberry Pi Case with modular design allows you to customise to your own requirements. Compatible with a standard 40mm Fan (32mm Bolt Spacing). 

No Glue required, simple to setup and large enough to accommodate a Pi mounted Fan.

All Raspberry Pi Ports are accessible. Ethernet and USB through the front (or rear) of the case and HDMI, USB Power and Audio jack are accessible through the side of the case.

Panels are interchangeable allow you to alter the setup to suit your own requirements.

Includes:

• 1 x Raspberry Pi enclosure
• 2 x Printed Side Panels
• 2 x Side Panel Blanks
• 3 x Standard Panels
• 1 x Raspberry Pi Port Access Panel
• 1 x Raspberry Pi Port Access Panel with Fan Mounts
• 1 x Dual Fan Panel
• 1 x Single Fan Panel
• 1 x Raspberry Pi Mount Panel

Required:

• 8 x M2.5*6mm Self Tapping Screws (Side Panels)
• 4 x M2.5*6 Bolts
• 4 x M2.5 Male to Female Spacers

Compatible with

• 40mm Fans
• 0.96 Inch OLED Display