Main Street Marvels: Main Street USA Trash Can

Need a little of that Main Street magic in your house or office? Look no further. These small Disney-inspired trash cans are perfect for the occasion. These little replica trash cans are great for wrappers, makeup trash, even candy storage!

Notes:

The Main Street USA can, can be printed easily with a .4mm nozzle, but I recommend a .2mm nozzle for the Main Street Emblem for finer detail. The only part that an AMS is needed is the emblem. The emblem is a tight fit an might require some light sanding on the sides to fit between the frame pieces. 

• Supports only needed for the Lid.

• Included is a blank flap if you don't want “PUSH” on there. 

Assembly:

You will notice “FRONT” Printed on the inside of the main section of the can. Make sure this is facing you when you assemble. Use a small piece of filament to attach the door before gluing on the frame around the lid. Once your door is secure, glue on the frame pieces. To get the door to flap closed more easily, add some weight by gluing a couple coins on the back of the door. You may need to work the flap back and forth a while for it to loosen up and flap closed on its own.

Once you have all the frame parts glued in place, simply line up all 4 corners and press the lid down to the main can. Be sure all 4 corners are even when pressing on the lid. Finally glue on the emblem on the front, and the optional feet.

That's it! Enjoy your little trash can! Be sure to keep a look out for my other trash can designs! Please like and boost if you like this model, your support is greatly appreciated!