Donald Duck (Mortal Kombat+Magic Kingdom) No AMS

Please Note: If you would like to sell printed versions of this model, you will need to subscribe to Playco3D’s Patreon for now in order to receive commercial rights. www.patreon.com/playco3d

Magical Realms: The Invasion

It began with a violent tear in the universe. The brutal atmosphere of the Mortal Kombat Realm ripped through reality, leaking directly into the whimsy of the Magic Kingdom. The beloved characters of this world had no choice but to protect their home.

With quick action, they devised a desperate plan: they had no other option but to train to become the best fighters the multiverse has ever seen to repel the threat.

Donald was the first to rise as a mighty guardian warrior. Charged with guarding the entrance to the kingdom, he mastered magical Ice abilities, summoning a spiky Ice Blade from thin air to freeze invaders in their tracks. But he is versatile; when temperatures and his temper rise, he switches to a deadly Bo Staff, channeling his fury into crushing physical strikes.

However, the portal is still open. The threat is growing, and Donald can no longer stand alone. From the shadows of the castle, more characters from the Magic Kingdom have volunteered to train as warriors, ready to join the fight.

Print Profiles:

This model includes two print profiles for Donald. Choose between a shiny blue and gold outfit with an ice spiked blade, or a green and black version equipped with a bo staff.

There are also two other weapons you can choose from, a trident, and a sharp long blade. 

Dimensions:

• At 100 percent scale, Donald stands approximately 8.0 inches (203 mm) tall. With the Ice Blade equipped, Donald stands about 10.25 inches (260 mm) tall.

• Scaling up should work without any issues. If you scale down, keep in mind that tolerances will become smaller and some parts may be more difficult to assemble.

   

Colors Used (Blue Version):

• Bambu Basic: Black, White
• Bambu Silk+: Blue, Silver
• Geetech Silk: Gold
• Esun: Gold - however it looks more Dark Yellow (For Bill and Feet)
• Sunlu: Clear Blue (for the ice blade)

Colors Used (Green Version):

• Bambu Basic: Black, White, Bronze
• Bambu Matte: Dark Green
• Geetech Silk: Gold
• Esun: Dark Yellow - named Gold

Assembly Tips:

 • The arm bands are marked L (left) and R (right) and include an arrow indicating the direction toward the hands. Refer to the image for guidance. 

 • The leg bands have markings on the top which are T (Top) and R/L (Right / Left).

 • The left and right black eyes have a very small cut that can be hard to see. Remember the Left and Right are for Donald's Left and Right eyes. Installing them on the wrong side will affect the final look.

 • When building the face, insert the bill first. Then install the left and right eyes with the black parts inserted, pressing firmly until they snap into place. Once installed, the eyes will be difficult to remove, so be sure all parts are correctly assembled before pressing them in.

 • When attaching the head, first insert the black neck piece and secure it in place. Then attach the completed head with the bill and eyes, making sure it is fully pressed back while gluing. It is best to lean Donald back so the head does not fall forward during assembly.

Assembly Steps:

• Attach the feet to the lower legs, then install the leg bands. Connect the lower legs to the upper legs using the pins, making sure all pins are fully pressed in so Donald stands level.

• Attach the lower robe, followed by the belt and upper body using the pin.

• Attach the left and right arms.

• Attach the arm bands, following the directions above.

• Attach the arm spikes. Pay close attention to the L and R markings to ensure correct placement.

• Attach the left and right hands.

• Build the head following the directions above. Insert the black neck piece into the hoodie first, then insert the completed head.

• Attach the left and right shoulder pads. Each pad is shaped to fit its respective side.

• Choose which weapon to build and place it in Donald’s hand. Your guardian is now complete and ready to protect the Magic Kingdom.

That’s it! Donald Duck, the Magic Kingdom Guardian, is ready to join your collection. Thank you for printing this model and supporting MixyPals and Playco3D. I’d love to see your finished print, so don’t forget to share your photos. More exciting designs are coming soon!