Modular pixel led profile lamp

There are 4 3mf files , 
Thin , thick led profiles for A1 and thin , thick led profiles for A1 MINI .
Thin profiles are meant to attach to the wall through screw holes or with double sided tape .
Thick profiles are more for lamp style designs ,they are thicker, much stiffer and don't bend like the thin ones . But of course you can add these to the wall as well .

led_profile_lamp_sloted_thick.3mf - bambu a1 plate description :
Plate 1 : Lamp base, base cover , led profile , led profile cover , usb slot to wire adapter .
Plate 2 : led profile without holes , led profile extension without holes , extension dowel connectors 38mm
Plate 3 : led profile with holes , led profile extension with holes one edge ,led profile extension with holes no , edge wall corner adapters 2x 
Plate 4 : Adapters - X,T,L,Y,45°, adapter covers chamfered and without chamfer , extension cover , extension cover with wire slot , adapter dowel connectors (28mm bottom holes and circular extension holes) / (19mm for adapter top holes) .
Plate 5 : Led diffusers for circular extension
Plate 6 : Led diffusers 40mm wide
Plate 7 : Led diffusers 60mm wide
Plate 8 : Circular extension split with and without holes
Plate 9 : Circular extension connected with and without holes

I recommend using glue for diffusers dowels and any covers.
Be careful, the slots can be easy to break .
If your making a long bar with multiple extensions you can screw aluminum extrusion or wooden plank on the back to give it some rigidity .
I've used ws2812b led lights , but any 5050 type 60led/meter led's should work. BT20 pixel led controller powered with usb .
If you're experiencing stringing use a heat gun to get rid of stringing . For elephants foot add a small brim .
The thick profile can also be used only with end covers and be placed on the table at 90° or 45° .
For quicker printing choose a 0.28mm layer height for the profiles and adapters , for diffusers use 0.2mm or less.

To make the small table lamp - print the first plate , choose diffusers from plate 5 or 6 print with 0.2mm layer height or less. 
To assemble the base you'll need 4x 10mm-15mm x 3mm screws for the base cover and 2x 20mm x 4mm screws for securing the led profile to the base .
Insert the led strip , it might be a bit difficult due to the slots ,but you can do it! Hide the controller and wires in the base (tight fit ,but it's doable), put on the top cover, plug in your light and enjoy!

Let your imagination shine and make the led shape you desire . 
Thanks for downloading :)