Cosmic Wonders Bookmark Set

These celestial bookmarks takes Fourth Wing and the Eye of Providence (All Seeing Eye) as their main building points. They are toned in distressed gold with many symbols and elements of the cosmos. The Fourth Wing bookmark takes on an explosion of stars and light of a galaxy, while the Eye of Providence has tarot inclinations. 

Note:  These bookmarks were meant for an 0.2mm Nozzle. Minute details were left there on purpose to get the overall effect. An 0.4mm Nozzle will not be able capture all the details. See below for comparison  If you don't want the tassel hole, go into objects and delete the tassel hole part. 

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Orange  Transmission Distance: 7
    PLA BambuLab Basic Gold  Transmission Distance: 5
    PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer (0.8mm) swap to Orange
    At layer (0.96mm) swap to Gold
    At layer (1.2mm) swap to Ivory White for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.