P1S Screen Riser

Here's a screen riser for the P1S, for all of you needing to tuck your printer into a cabinet and every few MMs count!

This decreases the minimum clearance of the front of your P1S from 25mm, down to just 8mm. For my cabinet, (Ikea Tonstad) it bought just enough room for the doors to close flush. 

Support is required. :/

But! You don't have to disconnect your screen cable, you can pass it through the tabs without disconnecting anything!

Worked great for me! If you have anything to add let me know!

P.S. the front face is oriented up in the profile, so you can easily add text or whatever you want! I also put in a little Bambu logo that you can fill with color if you're into that