Pokemon Hueforge - Pikachu & Satoshi

Boost MeUn petit clic sur “Boost” et tu m’aides énormément — sans rien dépenser ! Merci pour le soutien ❤️
A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️MembershipAvec le membership, tu peux vendre toutes mes impressions en toute liberté ! Un vrai coup de pouce pour mon travail ❤️ Merci ! With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you!

Soyez vigilant si vous utilisez un PLA différent de celui indiqué, les niveaux de distance de transmission peuvent varier et ainsi affecter le résultat.

Attention if you use a different PLA than indicated, the transmission distance levels may differ and thus impact the result.

 

Project: Sasha Pikachu Pokeball.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 235x235mm in size

 

    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Jade White  Transmission Distance: 5
    PLA Bambulab Basic Cyan  Transmission Distance: 1.7
    PLA BambuLab Basic Red  Transmission Distance: 4
    PLA BambuLab Basic Yellow  Transmission Distance: 4.5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Jade White
    At layer #15 (1.28mm) swap to Cyan
    At layer #16 (1.36mm) swap to Black
    At layer #18 (1.52mm) swap to Red
    At layer #23 (1.92mm) swap to Yellow
    At layer #24 (2mm) swap to Jade White
    At layer #27 (2.24mm) swap to Red
    At layer #28 (2.32mm) swap to Jade White
    At layer #30 (2.48mm) swap to Yellow
    At layer #32 (2.64mm) swap to Jade White for the rest.

 

Comment imprimer plus de 4 couleurs avec un seul AMS:

How to print more than 4 colours with a single AMS: