January 31, 2026
Description
Hello I present to you my view on soldering helper inspired by omnifixo.
There are two versions one made with bambustore hardware and other with Aliexpres hardware.
bellow you will see BOM and instructions for both versions
I've added new version of base for Bambulab hardware version. this one uses Screw to put pressure on balljoint
Collect all parts and tools. If you don't want to use silicone tubing spacer will not be needed. During printing you need to insert magnet into a base. In my print profile there is pause in g-code for that | |
| Clean ball from brim residue | |
in bottom arm (one with both holes going thru) use drill to get holes to perfect diameter. Move drill back and forward thru a hole and check with screw and dowel if they move freely. Don't overdo this step, check constantly! |
|
| Optional step: put on silicone tube on both arms | |
| Hamer in dowel. you can use bottom arm as a guide to make it more straight, | |
|
|
| Put arm assembly into base. This step is really hard as i wanted good friction. I hope someone will create better base for that 😉 | |
| Use it |
Collect all parts and tools. If you don't want to use silicone tubing spacer will not be needed. During printing you need to insert magnet into a base. In my print profile there is pause in g-code for that | |
in bottom arm (one with both holes going thru) use drill to get holes to perfect diameter. Move drill back and forward thru a hole and check with screw and dowel if they move freely. Don't overdo this step, check constantly! |
|
| Optional step: put on silicone tube on both arms | |
| Hamer in dowel. you can use bottom arm as a guide to make it more straight, | |
|
|
| |
| Put assembly on base and use it |
Boost MeIf you enjoyed this project please boost it, thank you!
License:
MakerWorld Exclusive License
ImRafau
