Asuka Langley hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100.95x180mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #856fdc PLA Sunlu Purple  Transmission Distance: 6
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
    #e0a8bb PLA PolyTerra Sakura Pink  Transmission Distance: 2.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Purple
    At layer #13 (1.12mm) swap to Red
    At layer #20 (1.68mm) swap to Sakura Pink for the rest.