Speaker Adapter 165mm / 6,5" - Dodge,Chrysler,Jeep

this is a speaker adapter version with no pre-made holes for 165mm / 6,5" speakers for many chrsyler, jeep, dodge or plymouth vehicles with that certain kind of speakers installed. look at your system, the speakers might have the same orientation of the three flaps on the outside of the adapter ring.

there are many aftermarket speakers available, you have to look at mounting-depth of the speaker of course and for a clean installation, get yourself adapter plugs as well - in the photo gallery you'll find a full prepared speaker for your orientation! another important thing is to mark your bore holes beforehand with a pen, the whole adapter is solid so there are no unnecessary holes in your installation.

i also recommend to cut the screws/bolts of the backside of the adapter after installing your speaker into it and finish the inner side of the ring with some kind of foam for a rattle free and flush/tight fitment to the door!

if you're having questions, feel free to reach out to me!

If you have any questions, feel free to contact me!

thank you for a like, share or boost :)