This bracket is designed to securely mount the AMS Hub on the Bambu Lab A1 Mini, attaching it to a stationary structural part of the printer to avoid vibrations or interference with moving axes. It repositions the hub on the right side for easy cable access and maintenance, eliminating the need to reach the often-inaccessible rear (e.g., in enclosures or against walls).
It's a true print-in-place design: prints as a single piece with no supports, no screws, and no assembly required. Leverages the printer's stock mounting points for instant slide-in installation – simply slide the bracket into the frame without unscrewing or adding hardware. Ensures perfect alignment, rock-solid stability, and clean right-side cable routing.
Key Benefits
- Right-side cable access: plug/unplug without moving the printer or reaching the back.
- Mounts to fixed frame: zero vibrations, no collisions with print head.
- Pure print-in-place: one print, no supports, no screws, no assembly.
- Stock slide-in fit: installs in 10 seconds using A1 Mini's original hooks/ledges.
- Tidy cabling: minimizes bends, clutter, and rear mess while preserving front ergonomics.
Print Recommendations
- Materials: PLA, PETG, ABS, or ASA – PLA works great for lighter duty; ABS/PETG/ASA for heat/vibration resistance near the printer.
- Orientation: Bed down with mounting surfaces facing plate for precise slide-in tolerances.
- No supports needed: Self-supporting geometry – 20-25% gyroid infill for lightweight rigidity.
- Settings: 0.2mm layer height; test hub clearance if using nozzle ≠0.4mm.
- Print time: ~50 min on A1 Mini with standard PLA/PETG.
Assembly Instructions
- Print the bracket (print-in-place, no supports).
- Power off A1 Mini. Slide in bracket to original right-side structural mount (press-fit using stock hooks – no screws).
- Snap AMS Hub into bracket slot (precise, secure fit).
- Connect cables from right side. Done!
NB for A1 you must use an adaptor I will publish it in 1 or 2 days and share link HERE
platini76
