Shining - Matrix - The Truman Show - HueForge

Shining :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #16 (1.36mm) swap to Jade White for the rest.

Matrix :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #9 (0.8mm) swap to Yellow
At layer #12 (1.04mm) swap to Jade White for the rest.
 

The Truman Show :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Silver
At layer #11 (0.96mm) swap to Black
At layer #18 (1.52mm) swap to Marine Blue
At layer #20 (1.68mm) swap to White for the rest.

Kill Bill :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.