Kyary Pamyu Pamyu Hueforge Ponponpon Jpop Kawaii

Project: Ponponpon.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 245x245mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23949mm

Filaments Used:  (* = Owned)
    #950051 * PLA BambuLab Matte Plum  Transmission Distance: 1.6
    #f5547c * PLA BambuLab Basic Hot Pink  Transmission Distance: 3.9
    #e4bdd0 * PLA BambuLab Matte Sakura Pink  Transmission Distance: 3
    #e1e4e7 * PLA eSun Cool White  Transmission Distance: 2
This print uses 4 unique filaments

Swap Instructions:
    Start with Plum
    At layer #13 (1.12mm) swap to Hot Pink
    At layer #20 (1.68mm) swap to Sakura Pink
    At layer #24 (2mm) swap to Cool White

This slider is set higher than the mesh depth.  It is not affecting your final mesh.  Consider removing it.

Border Only Colors from here until the end.
    At layer #28 (2.32mm) swap to Hot Pink for the rest.