Broken Heart - Mr.Numb - NO AMS

Boost Me🚀🚀🚀
If you like this model and want to support my work, I’d really appreciate a boost.
It helps a lot and motivates me to create more projects like this. Thank you! 💙

❤️ Mr. Numb – Stylized Heart Figure ❤️

 

I created Mr. Numb to practice sculpting 🖌️😄 a ✨ Smooth version coming in the next days!!
 

🧵Material

• Power glue (super glue)
• RED and BLACK paint, marker or u paint it inside bambustudio if u have a multicolor printer

🔧 Assembly Instructions

⚠️⚠️⚠️
I used bolt infill to safe filament, with bolt infill there are often small loose infill wich will make a sound when you shake it.
If u rather would like it solid instead of hollow (bolt infill) just use the infill you like!
⚠️⚠️⚠️
AS ALWAYS I RECOMMEND TO BUILD IT WITHOUT GLUE FIRT TO SEE HOW ITS DONE AND THEN USE GLUE!!!
⚠️⚠️⚠️

Eyes:

1. ⚠️⚠️⚠️  IMPORTANT: DO NOT GLUE THE EYE PARTS or you wont be able to get them in!  ⚠️⚠️⚠️
2. Place the eye pieces together without glue
3. Put them onto the lower eyelid
4. Slightly lift the under eyelid and the white part towards you while holding the upper eyelid in place
5. Carefully guide the connector of the upper eyelid into the hole of the main body (cant show on  pic its behind)

6. Once the connector is inside, apply a bit of pressure until the parts snap into place
    

Other parts:

• All remaining parts can be glued normally
  -the eye brows also require a lil bit of force
• One small drop of glue is enough

🚬 Cigarette Tip (Painting)

1. Paint the entire tip red

2. Add a few black dots on the top for detail

    

If you have any questions, feel free to ask 💬🙂
Happy printing and enjoy Mr. Numb ❤️🔥