Catan resource box

A small, practical box that keeps your CATAN resource cards organized and safely stored.

 

Supported card sizes: 

• 54x80 mm
• 43x67 mm

Please ensure to select the print profile that matches your CATAN resource cards.

 

Assembly:

1. Use a small piece of filament as a hinge pin to connect the parts.
2. Insert 4 magnets, size: 6x2mm

 

Update (2026-05-03)

I've trimmed the height and the inside of the flaps slightly. Some  users experienced that the box would'nt fully close. Please let me know if the problem persist.

 

Update (2026-03-06)

I've increased the height of all print profiles slightly to make room for expansion packs. Thanks for all your feedback!

 

 

Boost MeThank you ❤️

 

Tips and tricks for better results

1. If the pins are hard to insert, use a pliers and force them in a few mm at a time, or the pin will bend.
2. If the lid doesn't  fully close, try expanding the pin holes slightly with a 2mm drill at the end of the lids. 
3. Use strong magnets! I've had great result with the ones from the Bambu store, and not so much with the cheap ones from Aliexpress and similar sites.
4. Try different filament
5. Calibrate your printer
6. If everything fails, let me know and I'll do my best to assist