Heart Shaped Twisty Fidget Slider

Update 23/04/26: Thank you all for downloading and printing this, I appreciate all the feedback and comments, I have now updated all profiles to have a bit more clearance so it should slide nicely straight off the print plate and have less chance of pieces fusing together!

I have also added a new Knitted version of the Heart shaped slider here, https://makerworld.com/en/models/2701992-knitted-heart-shaped-twisty-fidget-slide check it out if you can :) 

---------------------------------------------------------------------------------------------------------------------

Twisty fidget heart slider, stands by itself without falling apart, but when picked up will slide, great to play with as a sensory toy, gift it to a loved one this valentines day or share with friends.

Choice of smooth or fuzzy skin prints in the profiles and also a profile with both in a multicolour stripey pattern.

Clean your bed for good adhesion, keep the settings in the profile for best results (no supports needed, ignore the warning in the slicer).

Once printed the individual pieces normally move without much force after printing, but if the pieces do stick use something thin and strong like the blade for the bed scraper that came with the Bambu printer to gently prise each leaf that is stuck, be careful of any sharp corners while doing this!

You can scale it up but would not recommend scaling down at all as the tolerances are very tight, it is very likely to fuse together!

You can also print at 0.24 layer height to lower the print time if needed, but you do get some quality issues on some of the overhangs doing this, and the fuzzy skin will look a bit different - the red one in the pictures was done at 0.2 and the purple one at 0.24 for comparison.

If you like this model please feel free to send a boost to support me and share your prints in the comments.