Never worry about where to set your cigar on the course again! This magnetic cigar clip is the ultimate golf cart companion. Designed to snap securely onto the metal strut of any standard golf cart, it keeps your cigar safe, clean, and within easy reach while you drive to your next lie.
Key Features:
- Strong Magnetic Hold: Attaches firmly to golf cart frames (or your Golfinity case) using two small embedded magnets.
- Universal Fit: The flexible clip design accommodates various cigar ring gauges, holding them gently but securely.
- Compact Design: Small enough to keep in your golf bag when not in use.
- Hygiene & Safety: Keeps your cigar off the chemical-treated grass and prevents burn marks on the plastic cart seats.
Bill of Materials (Hardware Needed):
- 2x Circular Magnets (Sizes: 5x2mm, 6x2mm, 6x3mm, 7x2mm, 7x3mm, 8x2mm, or 8x3mm)
- Super glue (CA glue) to secure the magnets in place.
Printing Instructions:
- Material: PLA, PETG, ASA, or ABS
- Infill: 15-20% (Gyroid recommended for strength).
- Walls/Perimeters: 3 walls for snap-flexibility.
- Supports: Standard tree support (auto) and position it on its base (not side!)
- Orientation: Print strictly as oriented in the file for the best clip elasticity.
Assembly:
- Print the model.
- Apply a small drop of super glue into the magnet recesses on the back.
- Press the 5x2mm magnets into the holes. Tip: Make sure the magnets are flush so they sit flat against the metal surface.
- Let dry, stick it to the cart, and enjoy your round!
JGGV
