Ubiquiti junction box

The Camera Junction Box UACC-Camera-JB-B is usually sold out in lots of Ubiquiti stores.
I designed and 3D printed this junction box that should fit the G6 Turret, G6 Turret Pro and possibly the G5 turrets and other cameras. 

This model has been designed with a drip section ring to limit water ingress.

The model is printed (using PETG) in two parts, the parts can be glued with CA glue. 
Please note: Remember to align the four main holes in the front and rear plates before gluing.

Installation
The whole model is fixed to a wall or overhang using four 3” (75mm) or longer screws that pass through the full model.
The camera is then fixed to the junction box with self tapping screws.

Please let me know what cameras you have attached to this junction box, so I can update a compatibility list.