Toy Steam Train Mini - 0.2mm Nozzle Required

I have a riddle for you:   What is cute, tiny, looks like a steam train and is very hard to stop printing more of once you have access to a 0.2mm nozzle?

You have probably worked it out by now.   It's the Toy Steam Train Mini

Important Note:  This requires a 0.2mm nozzle to print.   If you have the standard 0.4mm nozzle this is not for you (or more likely it is for you and you need to buy a 0.2mm nozzle right now)

Yes, this is essentially a tiny version of the much loved Toy Steam Train.   There are some tweaks to the model to ensure it prints correctly.  I thought it makes sense to be its own model as it has nozzle requirements and the cuteness factor is off the scale compared to its larger brethren.

Features

• It's a steam engine (that is a feature all to itself)
• It is easy to print, no supports, no mess, no fuss. (requires a 0.2mm nozzle.   Have you been warned enough yet?)
• It assembles in seconds, still no mess and no fuss
• It rolls on wheels (kind of like a train)
• It is tiny

Assembly

Here's the best strategy for assembly:

• Gently insert the 4 wheels with axle though the 4 axle holes in the base.  Don't try to force it
• Lie the train on its side with the wheels on the table and the axle protruding vertically on the top side
• Press the standalone wheel hole into the axle until you hear the click
• Repeat for 3 remaining wheels

In the Series

Check out the full train series here:

Please leave any comments of feedback.