Honeycomb storage wall with LED (HSW)

Honeycomb Storage Wall with LED :

Here is my version of the Honeycomb Storage Wall with a 1.4cm thick LED strip

The piece is 90cm by 60cm

Printing settings :

- Layer height : 0.25 – 0.3

- Wall loops : 3

- Infill : 0 %

- Brim type : Outer brim only

Optional :

Bottom surface pattern : Monotonic line

All inserts are here : https://makerworld.com/en/models/22521#profileId-27457

You need :

4x « Hexagon-countersung-and-hole (2x) »

7x « Insert-countersunk »

8x « Insert-hollow-for (4x) »

11x « Cover-countersunk »

Follow the instructions below for assembly and installation.

Here is a video of the project : https://youtu.be/EOUkTK0voWo