Boost Me支持我，讓我繼續。新年快樂。
可搭配我的其他作品，讓馬年更歡樂
享受動手做的樂趣！ 這款「福」與「富」公仔採組裝式設計，最酷的是它可以跟之前的 【手托漢字小人】 互換手部零件！擁有帥氣的比讚手勢與更多的變化可能，是您個人化桌擺的絕佳選擇。👍✨
💡 詳細說明
🎨 創作靈感
這款作品是漢字系列的進階版本。我將結構改為組裝式，這不僅讓列印過程更穩定，也讓您可以根據喜好：
- 自由分色： 例如用紅色印身體，搭配金色的手腳。
- 零件互換： 與我另一款作品「手托版本」的手部零件完美相容！ 手部固定為「比讚」姿勢，象徵對生活的肯定與滿滿的正能量。
✨ 作品特點
- 🛠️ 動手組裝： 簡單直觀的組裝設計，享受零件咬合的成就感。
- 👍 正能量姿態： 雙手固定比「讚」，為您的空間帶來積極氛圍。
- 🦵 靈活關節： 腿部關節可活動，讓公仔能帥氣地坐在桌緣、螢幕或裝飾石塊上。
- ❤️ 精緻細節： 腳底板藏有「愛心」圖案，在公仔坐下時展現反差萌。
🖨️ 列印與組裝建議
- 層高： 0.16mm - 0.2mm（強烈建議 0.16mm 讓卡榫更精準）。
- 填充： 15% - 20%。
- 耗材： 推薦使用 絲綢 PLA (Silk PLA)，紅金配色最能展現華麗質感。
- 組裝說明： 列印後，將手部與腿部零件扣入主體對應的關節窩即可。
- 小撇步：如果卡榫太緊，可稍微打磨或調整切片軟體中的「孔洞水平擴展」。
🇺🇸 English Description (English)
📌 Title
Double Fortune & Wealth: "Thumbs-Up" Articulated Figures
📖 Introduction
Enjoy the fun of DIY! This "Fu" (Fortune) and "Fu" (Wealth) figure set features a modular assembly design. The best part? The hands are fully interchangeable with my previous [Hand-Holding Kanji Series]! With their cool "thumbs-up" gesture and endless customization, they are the perfect desk companions. 👍✨
💡 Detailed Description
🎨 Inspiration
This is an upgraded modular version of my Kanji figure series. The assembly design ensures:
- Multi-Color Customization: Easily print the body and limbs in different colors (e.g., Red body with Gold limbs).
- Cross-Compatibility: The arm sockets are compatible with the hands from my "Hand-Holding" series! The fixed "thumbs-up" pose represents a positive attitude and a big "like" to your prosperous life.
✨ Key Features
- 🛠️ DIY Assembly: Simple, intuitive snap-fit design for a satisfying build experience.
- 👍 Positive Vibes: The "thumbs-up" gesture adds a boost of encouragement to your workspace.
- 🦵 Articulated Legs: Flexible joints allow them to sit stylishly on monitors, desk edges, or rocks.
- ❤️ Hidden Details: Features adorable "Heart" patterns on the soles—a cute surprise when they kick back!
🖨️ Print & Assembly Tips
- Layer Height: 0.16mm - 0.2mm (0.16mm recommended for a precise fit).
- Infill: 15% - 20%.
- Filament: Silk PLA is highly recommended for that premium metallic look.
- Assembly: Simply snap the arm and leg joints into the sockets on the main body.
- Tip: If the joints are too tight, a light sanding or adjusting "Hole Horizontal Expansion" in your slicer will help.
BigCake
