Master Chief Can Cozy Beverage Holder

This began as an intrusive thought, and became a reality!

I love Halo, Master Chief, and having the occasional beverage.  I thought it would be ridiculous if I could drink from a Master Chief helmet, so I made this!  It's a Master Chief helmet can cozy!  It fits standard size 12oz and 16oz cans, has a hole in the bottom to help you remove the can, and a comfortable handle to hold!

Note: the supports can be a bit tedious to remove, especially on the 0.2mm layer height version.  Take your time and they will come off cleanly.  I recommend using a pick or something that you can gently pull them away with.  The lens will require slight trimming to fit; I used a deburring tool and it worked great - was able to trim in 1-2 minutes on my first print.  I glued the lens in place.

Thanks to Kolinc for creating the original Master Chief model, then T63D for making a version with a separate lens!  I used Kolincs model as the starting point, filled the interior to be a solid piece, added my handle, carved out the can holder section, then used T63D's lens as a negative part to recess it, then again as a positive part to make the lens print separately to conserve filament!