Toilett flush button JIKA

I designed this toilet flush button because the original two‑button version broke, and I wanted to replace it with a simpler, single‑button solution. Our toilet tank is a JIKA brand two‑button model with a 35 mm diameter opening, and the front panel is approximately 8 mm thick.

The installation is quick and easy. Insert the top part into the opening, then screw the nut on from the back. The two rods inside the tank can be adjusted in height, so you can set how deep the button should press.

After 3D printing, the button may be a bit louder at first, but a light sanding usually improves the movement.

Thanks for stopping by — I’d be happy to see your printed version of the model!