King’s / Queen’s Crown

This decorative royal crown is designed for easy single-color printing without AMS.

The crown body is printed as one solid piece, while the colored gems (round and diamond-shaped) are printed separately.

 

The inner diameter of the crown is 160 mm, which means it can be printed on all Bambu Lab printers except the A1 Mini.
 

👉 An A1 Mini–compatible version is now released, with an inner diameter of approximately 110 mm.

Assembly

• The gems are press-fit into the crown and lock in place without glue, making assembly quick and clean. You can choose the color of each gem to create your own custom look. 
• The tolerances are set for a press fit, so there should be no issues. However, if you are having problems and cannot press the gems in, I strongly recommend printing them again scaled down by a few percent. Pushing too hard may cause the crown to crack.

 

 

Print the crown in your favorite base color and experiment with different filament colors for the gems to create your own royal style 👑

 

Happy printing

 

Share your thoughts and show off your prints in the comments!

Boost MeI would really appreciate a boost if you liked my model 😉