Ant Model (Fast Print, No Support)

3D Ant Model (Fast Print, No Supports)

This is a sliceform-style 3D ANT Desk display model designed to print extremely fast and assemble into a clean desk display model.

All parts print flat and slide together into a sturdy ant shape.
No supports needed, no glue required — but you can glue it permanently if you want.

22 cm version

• Lenght: ~220 mm, 
• Segment thickness: 2 mm, 
• Print time: 2 plates, total 2h8m
• Filament used: ~65 grams
• Assembly time: ~15 minutes
• Supports: None

Printed on: Bambu Lab X1C,  0.16 mm print profile, Sunlu PLA+ Brown

11 cm version

• Length: ~110 mm, 
• Segment thickness: 1 mm, 
• Print time: ~34 minutes
• Filament used: ~9.5 grams
• Assembly time: ~15 minutes
• Supports: None

Printed on: Bambu Lab X1C,  0.16 mm print profile, PLA Matte Charcoal 

Assembly: – Sliceform Ant

This model is designed to be assembled without glue. All parts slide into the slots and lock together by friction.

Assembly time: ~15 minutes
Difficulty: Easy

Done!

Optional – Glue (Permanent Assembly)

The model is designed to work without glue, but if you want it fully permanent:

Add a tiny drop of glue in each slot after everything is aligned.