CUSTOM START GCODE "Change the Purge line"

The L-shaped purge line in the back right has been moved to the front to shorten the distance.
Furthermore, it is combined with the calibration line to make it easier to remove.
You can also remove it even if you disable calibration.

Change the description after "T1000" at the bottom of START GCODE.

T1000
G1 E{-retraction_length[initial_no_support_extruder]} F1800
G1 X200.0 Y10.0 Z0.2 F24000.0;Move to start position
G1 E{retraction_length[initial_no_support_extruder]} F1800
M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}
G0 X245 E3.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}
G0 Y10.5 E0.1
G0 X200 E3.4