Under Cabinet Kitchen Scale Holder -Adhesive Mount

This holder was designed to mount a kitchen scale under a cabinet using double sided adhesive tape.
For exact dimensions, please see below.

The scale slides inside the holder and stays securely in place while remaining easy to remove when needed.

The design is optimized for:

• Easy printing (no supports)
• Good strength with default Bambu settings
• Large adhesive contact area
• Clean visible exterior

Dimensions (IMPORTANT)

External

• Length: 150 mm
• Total Width: 25 mm

Internal (Scale Slot)

• Internal Height: 17 mm
• Internal Width: 18 mm

If your scale fits inside these dimensions, it should work. If your scale has other dimensions, please resize based on your own measurements. The large double sided tape area makes it a good fit for smaller models also.

Installation

1. Clean cabinet surface (recommended: isopropyl alcohol)
2. Apply double sided tape to flat back surface
3. Press firmly for 20–30 seconds
4. Wait before loading weight (recommended 30–60 minutes)

Printing

Printed on: Bambu Lab A1 Mini

Material: PLA

Settings: Default Bambu Lab profile

Orientation

Print flat on build plate. No supports required.

Notes

PLA works well for indoor kitchen use. If mounting near strong heat sources, PETG is recommended.

If you print this, I would really appreciate a like or photo of your setup 🙂