GLOCK AAP01 KIT Complete Version

Say welcome to a new AAP01 kit, this time a "glock" aspect.

Besides other of my models, which have the top split in two parts, the objective with this one is to have a full solid upper, and the lower.

 

HARDWARE NEEDED:

2 M3x4x3mm insert for rear sight holes.

You will need to reuse/transfer most of the parts of your stock AAP01.

If you find any errors, do not hesitate to contact me and I will try to solve them as soon as possible.

 

UPDATES:

V0.1-> It has been added a retainer on the lower for the upper to stay more firmly on to the lower. See photo for more infografic info.

V0.2-> The fit between the supperior and inferior part has been fulli tested, and now ables to mount and fit them perfectly. Theorically, It shoould now be ready to use. But I have not moved yet the internals to the new frame and upper.

V1-> Finally, the kit has been tested and now its fully compatible with all the internal parts, meaning that is now fully functional.

 

Future Updates:

- Adding the posibility to reuse the stock front sight.

- Solving some model errors, where the printer generates holes when printing with 0.4mm nozzle due to some walls been too thin.

- Adding a version with some kind of threaded front to use silencers.

 

Boost MeReward my work by giving a boost!