Summary: A practical tool designed to assist with single-person drywall (gypsum board) installation. It acts as a temporary support, holding the board in place against the ceiling or wall frame, allowing you to drive the screws without assistance.
Key Features:
- "Third Hand" Functionality: Essential for solo work on ceilings and slopes.
- Keyhole Slot: Allows for quick attachment and removal from the stud/frame without fully removing the mounting screw.
- Robust Geometry: Designed to withstand the weight of standard drywall sheets.
Printing Recommendations:
- Material: PETG, PLA
- Infill: 15% or higher (Gyroid or Cubic recommended).
- Wall Loops: 3 or 4 perimeters for structural strength.
- Supports: No supports required if printed flat on the build plate.
How to Use:
- Fasten the tool using a screw (utilize the keyhole slot).
- Rest the edge of the drywall sheet on the tool's lip.
- The tool supports the weight while you screw the board permanently into the frame.
ZetoStudio
