Husky Shelf Bracket

This is a very simple bracket for a Home Depot Husky Warehouse Shelf system. The sides of the shelving system is 2 feet deep, and has square cut-outs. This bracket will fit into these cut outs, and hold a shelf 5.5 inches wide, such as this shelf: https://www.homedepot.com/p/Waddell-Pine-Shelf-with-Beveled-Edge-24-in-x-5-5-in-x-0-75-in-Unfinished-Sanded-Wood-DIY-Home-Decorative-Wall-Shelving-1360/204397105

 

If you have a need for a different width of shelf, please reach out. I should be able to generate a bracket like this for any shelf width.

 

Print on it's side for most strength. Turn on normal (auto) snug supports. They should only be generated underneath the hooks that go in the square holes. I printed in ABS with six walls and 30% Gyroid infill.

 

EDIT: I have added, per request in comments, two new versions that have no lip, and screw hole(s) to fit #8 countersunk wood screws (1.5" is probably a good length for a regular thickness shelf, but please comment what works for you and I will update this with people's recommendations). If you print this on it's side, you will probably need to generate supports inside the holes, which is not ideal, but I don't know how you could avoid it.

I have also updated the license to allow for remixes.

 

Boost Me

And/or buy me a cup of coffee. 

Boosts and tips are never expected, nor required, but always appreciated.