HueForce TT Assen

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.4mm

    #080a0d PLA BambuLab Basic Black  Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #bb3d43 PLA BambuLab Matte Dark Red  Transmission Distance: 1.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Blue
    At layer #19 (1.6mm) swap to Dark Red
    At layer #23 (1.92mm) swap to Jade White for the rest.

 

Boost MeWant to keep seeing more designs like this for free? Please give me a boost so I can continue creating even more designs.

 

This design is intended for non-commercial use only.