Full Bed Cleaner Sheet (255x255) – Low Waste 🧽
Keep your build plate spotless with this ultra-light cleaning sheet. This model prints a single, large layer across the entire surface of your bed, bonding to those annoying tiny plastic bits and leftover residues that a scraper just can't reach.
🛠️ How it works
Instead of scrubbing your plate, you print this 1-layer sheet. As it cools and you peel it off, it acts like a "deep-cleaning mask" for your build plate, lifting away all debris and leaving a perfectly clean surface for your next project.
💎 Key Features
- Full Coverage: Specifically designed for 255x255mm beds (Bambu Lab A1, P1P, P1S, X1C, X1E).
- Low Waste: Despite its size, it only weighs 9 grams.
- Fast Print: Ready in less than 30 minutes.
- Safe & Simple: No handles or protrusions—just a flat sheet. Simply flex the build plate or gently lift a corner to peel it off.
⚙️ Print Settings
- First Layer Height: 0.12 mm (Recommended to save filament and ensure a tight bond with debris).
- Walls: 1 wall.
- Supports: 🚫 None.
- Infill: Not applicable (single layer).
- Speed Tip: For the best results and maximum debris pickup, consider slowing down your printer to 50% speed during this print.
⚠️ Material Recommendations
- Best Choice: PLA or PETG (any stiff filament).
- Avoid: Do not use TPU (it may be too difficult to peel off or too stretchy for this purpose).
Pro Tip: This is the perfect way to use up the last few meters of a "mystery" filament spool!
Boost Medid it clean your plate? if so, you can boost me :D
Majkerrr
