Simple and Minimalistic Polaroid photo stand
Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle just slightly past vertical so they can be viewed easily anywhere you put them.
🛠 Print Settings:
- Layer Height: 0.2mm
- Wall Thickness: 2 walls
- Infill: 15% Rectilinear
- Bottom Layers: 3 layers
- Top Layers: Aim for 3 top layers for a polished surface.
- Supports: Not needed
- Print Speed: Moderate speed for quality results; adjust to your printer's capabilities.
- Nozzle: 0.6mm or 0.4mm
- Filament: PLA works great, but feel free to explore with different materials and colors.
🔄 Updated:
- Jan 24: I have added a 90 degree version for anyone who wants to keep their photos completely vertical.
- Feb 24 : I didn't think so many people would be interested in my model, I have created a couple of extra variations for anyone interested. You can also easily change the width by scaling the axis in the slicer (only scale the width), but I have made a few extra for quick reference.
- Different widths
- 30mm width
- 60mm width
- 70mm width
- Different slot sizes The original slot where the photo sits in was made to be 1mm in width as to accommodate all picture sizes and less accurate printers, but I have also added some tighter photo slot sizes for people that want more of a grab on their photos.
- 1mm photo slot width
- 0.8mm photo slot width
- 0.6mm photo slot width
- 0.4mm photo slot width
🤔 Feedback Welcome: If you make this design I would love to see what you have done with it, If you have any feedback or requests for improvements I'm all ears. 😁👂
Happy Printing! 🖨✨
DylanRyanDesign
