Blocs - 3D-Printable Brick Clog Shoes

Ever stepped on a toy brick in the middle of the night? Now you can get your revenge by stepping in them instead!

 

I'll be completely honest: these are not practical, and they definitely aren't the most comfortable shoes you'll ever wear. They probably aren't for everyone, and you definitely shouldn't run a marathon in them. But if you're looking for the ultimate quirky fashion statement, a fun cosplay prop, or just a really unique pair of house shoes, Blocs have you covered.

 

 

Customise your Blocs

Sizing

By default, this model is designed to fit an EU Size 42 (roughly US Men's 9 / US Women's 10.5).

 

Need a different size? Simply scale the models up or down in the slicer before hitting print.

Remember to scale all models by the same percentage!

Heel Size

Each profile has a regular size and a small size heel piece to choose from.

Colours

Each Blocs shoe is made up from individual components:

• 1 x Main Shoe
• 2 x Additional Shoe Pieces(X/P/A series profile only)
• 1 x Topper
• 1 x Heel
• 1 x Grip
• 2 x Tags (optional)

Switch the colours in the slicer to make your own unique Blocs.

Assembly

ℹ️ You'll need superglue for the assembly process.

 

Step 0: If you printed the X / P / A series print profile, the main shoe component comes in 3 pieces.

Superglue these pieces together by applying superglue liberally on all connecting surfaces.

Step 1: Superglue the “Buildy” tags onto the Heel piece.

Step 2: Superglue the Grip piece onto the bottom of the Main Shoe.

Step 3: Insert the Heel piece into the holes on the Main Shoe, then rotate the Heel piece backwards as shown.

The Heel piece only fits 1 way and you will need to slightly bend it to do this.

 

Step 4: Place the Topper onto the shoe. Optionally, you can superglue it into place.

Step 5: You're done! Now print the other shoe :)

Boost MeThanks for boosting! It helps me make more free models :)

Share your creations!

I'd love to see your prints! Please share them :)

Recommended settings

I've applied my recommended print settings to the attached print profile, but if you're printing with a different machine, these are my recommended settings:

• Filament: ‘TPU for AMS' filament.
• Supports: Yes, I recommend PLA for supports.
• Infill: 5% Gyroid. If you're using a filament that's more flexible than ‘TPU for AMS’, maybe go for 7-10% infill.
• Wall loops: 3
• Brim: I recommend an outer-brim when printing with TPU.